Re: [ts-7000] Using QT with TS-7390?

["Donal O'Connor" <>]

Hi,

ftp.embeddedarm.com is working for me.

I have good bit experience with QT and the TS7390.

There's a bit of modding to do with QT for the TS-7390. There was a colour issue with mine anyways. You may need do this.

I've done my final yr project usin QT and the TS-7390 and I blogged everything at http://automon.donaloconnor.net/

I've the compiling steps done at: http://automon.donaloconnor.net/cross-compiled-qt-embedded-step-by-step/74/
I've installing and configuring Tslib for touch screen at: http://automon.donaloconnor.net/installing-tslib-and-calibrating-it/83/
I've deployment and set up of QT at http://automon.donaloconnor.net/deploying-qt-embedded-443-on-the-board/88/


Hope that helps.

On Sat, Aug 1, 2009 at 7:51 AM, Zz Zimmerman <> wrote:

 

So,

 

I have my board up and running and want to do some simple graphics.  Basically text and some simple line drawing.  It appears from the documentation on the site that QT might be the way to go.  Two questions:

 

1.       The ftp.embeddedarm.com link doesn’t seem to work anymore.  I’ve tried using an ftp client and just clicking on the links but nothing connects.  Is this just temporarily down?  Has anyone been able to get anything from the site recently?

2.       Anyone have an experience using QT on the 7300 series?  Any alternatives you would recommend?

 

Thanks!

 

…Z

 

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___