That would be (as root or prepending sudo):
ln -s /dev/ttyAM0 /dev/ttyS0
--- In ts-7000%40yahoogroups.com, "ramos.carlos76" <ramos.carlos76@ ...> wrote:
>
>
> Because I can determine the avaialable bytes to read, I think the serial
> port ttyAM0 is correct...
>
> How you create a symbolic link from /dev/ttyAM0 to /dev/ttyS0?
>
> I can read 4 lines with readline(), however the program show the
> exception and stop reading the serial port.
>
>
> --- In .com, "tedapt" <tedapt@> wrote:
> >
> > Are you certain of the serial ports names? I run rxtx on TS7260 and
> TS7250s, and found I
had to create a symbolic link from /dev/ttyAM0 to
> /dev/ttyS0. As I recall, rxtx relied on a hardcoded reference to
> /dev/ttyS0, and my attempts to use the TS boards' /dev/ttyAM0 was being
> ignored by rxtx. I had to create the /dev/ttyS0 sym link as an alias to
> the TS serial device and used it instead.
> >
> > --- In ts-7000%40yahoogroups.com, "ramos.carlos76" ramos.carlos76@
> wrote:
> > >
> > >
> > > Hey everyone,
> > >
> > > I'm using rxtx with the java. The program in my pc (windows
> > > xp) works without problems, but in ts7390 have errors.
> > >
> > > When start the
> > > program (jamvm -Dgnu.io.rxtx. SerialPorts= /dev/ttyAM0: /dev/ttyAM1
> -jar
> > >
program.jar) show this warning:RXTX Warning:Removing stale lock
> file.
> > > /var/lock/LCK. .ttyAM0
> > >
> > > I can send files and ask the available bytes to
> > > receive, but if read the inputStream appears the
> > > exception:java. io.IOException: Input/output error in nativeavailable
> > >
> > > It is
> > > the size of inputStream the ts is very small? have any idea?
> > >
> > > Thanks for
> > > any help pointing me in the right direction!
> > >
> > > Carlos
> > >
> > >
> > >
> > >
> > >
> > > --- In ts-7000%40yahoogroups.com, "ramos.carlos76" <ramos.carlos76@ >
> > > wrote:
>
> > >
> > > > Hey everyone,I'm using rxtx with the java. The program in my pc
> > > (windows
> > > > xp) works without problems, but in ts7390 have errors.When start
> the
> > > > program (jamvm -Dgnu.io.rxtx. SerialPorts= /dev/ttyAM0: /dev/ttyAM1
> -jar
> > > > program.jar) show this warning:RXTX Warning: Removing stale lock
> file.
> > > > /var/lock/LCK. .ttyAM0I can send files and ask the available bytes
> to
> > > > receive, but if read the inputStream appears the
> > > > exception:java. io.IOException: Input/output error in
> nativeavailableIt
> > > is
> > > > the size of inputStream the ts is very small? have any idea?Thanks
> for
> > > > any help pointing me in the right direction!Carlos
> > > >
> > >
>
>
>