[ts-7000] rt_printk doesn't print out..

To:
Subject:	[ts-7000] rt_printk doesn't print out..
From:	"pakorn_0608" <>
Date:	Thu, 09 Jul 2009 07:38:00 -0000

I'm use TS7400 board
I compile module for RTAI on TS7400.
It can use insmod into RTAI

I wanna debug my stage with rt_printk but there is nothing print out when i'm 
running module.

How should i ddo with this problem?
Thank in advance.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] rt_printk doesn't print out.., pakorn_0608 <=

Previous by Date:	[ts-7000] Re: ts7350 i2c-gpio, eli
Next by Date:	[ts-7000] TS7800 - SD card fails to boot, Damir Dzemidzic
Previous by Thread:	[ts-7000] TS-7800 mainline Kernel patches, Stefan Agner
Next by Thread:	[ts-7000] TS7800 - SD card fails to boot, Damir Dzemidzic
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU