--- In "eli" <> wrote:
>
> --- In <jason@> wrote:
> >
> > On Wed, 08 Jul 2009 18:43:39 -0000, "eli" <ec173@> wrote:
> > > Hello, I am trying to get i2c to work on the gpio header on a ts-7350.
> > > I would like to use the official ts-kernel, because in our project we
> > also
> > > need the xuart7350 module. has anyone gotten both of these modules to
> > work
> > > at the same time?
> >
> > 2.4 or 2.6? There should be a file in the group files section for a i2c
> > bitbang module for 2.4, havne't heard anything from the 2.6 crew that I
> > know of.
> >
> > --
> > Jason Stahls
> >
> 2.6, I'm chipping away at a driver for it as we speak...
>
Well, I made a start at it. I've posted what I have so far at
http://eli.neoturbine.net/files/i2c-ep93xx.c
It does not seem to work, for one udev does not create /dev/i2c-0.
If I create the file with mknod, it still says "no such device" when I try to
open it. If someone who has written kernel modules before (I have not) would
take a look at my code and give me some pointers, I would be much obliged.
Thanks,
Eli
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|