Thanks Ted,
Still trying to get my touchscreen calibarated with tslib.
Here's the status:
I load ts-lcd and tsdev. I get touchscreen events on /dev/input/ts0.
But trying to calibrate using ts_calibrate I get a message that the
touchscreen is not recognized.
So my conclusion is that tsdev (a compaq touchscreen emulation driver) is not
needed or wanted. Besides, it gives a message that it is obsolete. So I just
want to use the raw driver ts-lcd.
But I cannot find a device. What is the device name for ts-lcd and how can I
access it and point tslib to it?
Can you (or anyone else) help me sort this out?
Thanks,
Brian
--- In "Theodore A. Roth" <> wrote:
>
> On Fri, Jul 3, 2009 at 6:08 PM, bsmuck2000<> wrote:
> > Ted,
> >
> > Do you have documented somewhere what the change to the ts_lcd.c file was?
> > I'm trying to get the touchscreen thing going on lenny and have been
> > having problems.
>
> http://ted.openavr.org/linux-2.6.29.1-ts7390/0042-ts7390-dummy-pressure.patch
>
> >
> > You wrote about that...
> >> minimal change to the ts_lcd.c file in the kernel instead of tweaking
> >
> >
> > Also do you load both the ts_lcd and tsdev drivers or just the ts_lcd?
>
> Since I'm not using the ts supplied kernel, there is no tsdev module.
> I'm just using ts_lcd.
>
> Ted
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|