Hi , I'm doing my project of end of year using the TS7390 card.
I must write a program for ADC converter.In first time I use the adc_7250.c and
when I execute this program I find all calibrations values at 0x0.But when I
comment out the following lines
>> //check if board has stored calibration values
>> if(buffer[i] != 0xFF)
>> virgin = FALSE;
that means without refer to calibration values (using approximation) I find
error in voltage value read by the program.
Please can you send me the updated program or if you have any idea about
calibration values?
In advance, thank you very much for your help.
Kind Regards
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|