Damir Dzemidzic wrote:
> Compiling it for PC (windows) would take me bit of time to set up virtual
> linux along the compiler with all itty nity gritty pieces of development
> tools.Though, that is pretty correct way of double checking.
>
I'd recommend it - valgrind will catch a lot of stack-bashing problems.
Since you're encountering a fault in exiting the program, a stack
bashing problem might be a good place to start checking.
> Regarding ttyAM1, I think that it is part of TS7300 or something, while
> TS7800 uses ttyS0(1) ports.
>
Sorry - thought you were using a ep93xx based board. I don't have a
7800; so you're probably right here.
One thing to check is that your compiler toolchain is correct - are you
using TS's supplied toolchain or have you rolled your own?
I get random seg faults using any toolchain _other_ than 3.4.6 on the
TS7400 (ep9302).
-Brett
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|