Re: [ts-7000] Re: TS-7300 ADC on FPGA

First, the base address of the FPGA is 0x72A00000.  It's not clear to me what you're question is. Are you asking how to create registers on the FPGA and write in to them from your C program?

--- On Mon, 6/22/09, tylliot <> wrote:

From: tylliot <>
Subject: [ts-7000] Re: TS-7300 ADC on FPGA
To:
Received: Monday, June 22, 2009, 5:32 PM

--- In .com, "tylliot" < > wrote:
>
> I have read in the manual for this board that there is one available channel on the onboard A/D converter and I would like to be able to continuously sample from it for a control system I am working on. I am using the opencore TS-7300 project and I am not sure how to go about initializing the ADC in verilog and the FPGA to get input from the available channel. Any help is greatly appreciated!
>

I have had to change my design a little bit, now I am using the TS-ADC16 which is a 16 bit A/D converter that connects to the PC-104 bus. I am trying to get the digital output from the ADC to the FPGA on the TS-7300. I am thinking I will need to write the ADC output to one of the memory registers on the FPGA board and use my FPGA code to read that in and use it accordingly.
I tried making a program that does the A/D conversion and then writes to 0xa7200000 which the CPU should send to the FPGA, but I'm not sure if that is working correctly. Any ideas here?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___