You know, I had the very same problem. I'm going to give you some advice:
to make peekpoke work on the TS-7800 you can download this:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/binaries/ts-utils/
I guess you can do it for your SBC, look for similar repository for your SBC,
where you can actually download peekpoke library, then you have to move that
file to /usr/bin, and give the permision to execute. The next problem you're
going to face is that in order to run the script for shell, normally the
instructions for run it that come with the manual don't work at all so you must
run it on this fashion
. ./tsadclib (NOTE THE FIRST DOT)
second, if when you do the tsadcstart command, you normally would spect a 1,
but you will read a 0 instead, but don't worry it's normal, your card it's
working as long as the green led blinks.
and last but not least if the lectures you're reading are too weird if you have
0V and you read something like 2067, and you're in like 0-5V range for reading,
don't worry, it's normal (they didn't include all the info on their doc) the
thing is that you have a -2048 to 2047 (instead of a 0-4095)scale and they
don't warn you.
Yes, they forgot a lot of info on the manual, and they are very slow in
answering, believe me, this was a pain on the a... I hope that this advice save
you for the struggle I had to live.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|