[ts-7000] Use 7800 DIO to reset a modem

To:
Subject:	[ts-7000] Use 7800 DIO to reset a modem
From:	"eric.robishaw" <>
Date:	Fri, 05 Jun 2009 17:37:26 -0000

I have a Cell-modem connected to the 7800 through serial connection.
I need to send a hardware reset to the modem, which I can do on a separate 
reset pin...

Anyhow, the (normally open) pin needs to be connected to GND for about 2msec to 
reset.  Can I connect to one of the DIO header pins and open an output to 
accomplish this?

Thanks
Eric



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Use 7800 DIO to reset a modem, eric.robishaw <= Re: [ts-7000] Use 7800 DIO to reset a modem, Jason Stahls

Previous by Date:	Re: [ts-7000] Re: Install lenny disto on 7800, Eric Robishaw
Next by Date:	[ts-7000] Re: Connecting to a PIC24?, charliem_1216
Previous by Thread:	[ts-7000] 0.68 secs Booting Time for ts7800: REALLY?, s.magda@rocketmail.com
Next by Thread:	Re: [ts-7000] Use 7800 DIO to reset a modem, Jason Stahls
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU