ts-7000
[Top] [All Lists]

[ts-7000] Connecting to a PIC24?

To:
Subject: [ts-7000] Connecting to a PIC24?
From: "bburtan65" <>
Date: Wed, 03 Jun 2009 23:15:43 -0000
Does anyone here have any experience talking to a PIC24 over USB from a TS 
board (7260) with the generic USB to serial driver and having loaded the 
MICROCHIP USB FIRMWARE onto the PIC?

On the Linux side of things, is it enough to insmod usbserial.o followed by 
mknod /dev/usb/ttyUSB0 c 188 0
And then simply using ttyUSB0 as a serial device in regular C code (assuming 
that there is something running on the PIC to receive the data, even a simple 
loopback echo)





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU