[ts-7000] udhcpc error, FATAL: couldn't listen on socket, Operation not permitted

["inboxfullforsubash" <>]

Hi,

I have a TS-7250 with the default Linux 2.4 that came with the board. I added a 
High resolution timer patch and recompiled the kernel to support time 
resolutions of 1 us. Using TFTP, I load the kernel w/o deleting the default 
image on the Flash. The kernel loads and works fine giving microsecond 
resolution for time, except that at start up, the UDHCPC fails to retrieve an 
IP and displays the following message:

"Determining IP information for eth0....info, udhcpc (v0.9.9-pre) started 
error, FATAL: couldn't listen on socket, Operation not permitted"

This does not happen with the Linux that came with the board which is able to 
retrieve the IP dynamically. I did select 'HCP support, BOOTP support, RARP 
Support and ARP daemon support' in menuconfig before compiling the kernel. But 
I am not sure why this is happening. Any thoughts?

Thanks
Subash



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/