--- In "alexanchoragealaska" <> wrote:
>
> Hi,
>
> I purchased several TS-7260 boards about a year ago. One of the boards
> recently stopped recognizing RTC clock (soldered onto TS-7260 board). So
> after reboot (which happens because of WDT reset) the time goes to 1-1-1970.
>
> When I am trying to access RTC via "hwclock --show" I am getting:
> "hwclock: Could not access RTC: No such file or directory"
Hi Alex --
Maybe your /dev/rtc device node is missing? If so, 'mknod /dev/rtc c 254 0'
may get it working again.
regards,,, ........ Charlie
>
> Any ideas what might be going on? I did try to change some setting that
> particular board long time ago, but I don't think it should effect anything.
> Is there some setting that enables / disables RTC? If not, is it possible
> that the RTC battery is too low already?
>
> - Alex
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|