[ts-7000] armv4t or armv4l

To:
Subject:	[ts-7000] armv4t or armv4l
From:	"j.chitte" <>
Date:	Fri, 08 May 2009 15:28:55 -0000

Hi,

I have been setting up crosstool-ng with armv4t but I just noticed that the 
TS7250 I have connected says otherwise.

$ uname -a
Linux arm 2.4.26-ts11 #3 Tue Jun 6 14:13:14 MST 2006 armv4l unknown


should I be using armv4l for ARCH ??

thx




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] armv4t or armv4l, j.chitte <= Re: [ts-7000] armv4t or armv4l, Christian Gagneraud

Previous by Date:	[ts-7000] Re: ts-7400 bootload freezes, jeremie.chevalier
Next by Date:	Re: [ts-7000] armv4t or armv4l, Christian Gagneraud
Previous by Thread:	[ts-7000] Re: ts-7400 bootload freezes, jeremie.chevalier
Next by Thread:	Re: [ts-7000] armv4t or armv4l, Christian Gagneraud
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU