ts-7000
[Top] [All Lists]

[ts-7000] Re: pwc kernel module on the ts-7800

To:
Subject: [ts-7000] Re: pwc kernel module on the ts-7800
From: "lunix1337" <>
Date: Sat, 02 May 2009 21:56:05 -0000
I finally got it to compile.. thanks.

Does anyone have any experience using this kernel module?

I have a simple program that open and closes the device. if i run this program 
several times, the program will get stuck attempting to open the device. the 
load average then jumps real high, and stays that way until i reboot the board.

--- In  Frank <> wrote:
>
> lunix1337 wrote:
> >
> >
> > nobody? :(
> >
> > --- In  <ts-7000%40yahoogroups.com>, 
> > "lunix1337" <r0cketb0y@> wrote:
> > >
> > > I'm having trouble getting the cross compiler to work in my 
> > environment. I also tried to get the kernel to compile on the target 
> > without success.
> > >
> > > I just need to pwc kernel module so that I can capture from my usb 
> > camera. do any of you guys have this kernel module already compiled 
> > for the latest image?
> > >
> > >
> > > Thanks!
> > >
> >
> > 
> Which version (release date) of the TS kernel are you using?  I have my 
> environment to build.
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Re: pwc kernel module on the ts-7800, lunix1337 <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU