[ts-7000] Can't write to EEPROM?

["" <>]

Hello,

Some bad day I turned on my TS-7260 and got nothing on the serial output. Only 
green LED was flashing rapidly all the time.
So I've connected to my board via serial_blaster (JP1 set), send boot.bin and 
redboot.bin and sucesfully menaged to access RedBoot by serial.
After that I execute:

load -v -r -b 0x00200000 -m xmodem
* send file by xmodem *
eeprom_write -b 0x00200000 -o 0 -l 2048

And, when I make: eeprom_read -b 0x00200000 -l 2048 it returns only zeros. That 
means the RAM area isn't sucesfully written to EEPROM. File was sent OK (I've 
checked the RAM dump) and I tried several times to write it. Can it be 
corrupted EEPROM? Any ideas?

Val



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/