Re: [ts-7000] Re: Missing characters in Serial I/P

To:
Subject:	Re: [ts-7000] Re: Missing characters in Serial I/P
From:	"Breton M. Saunders" <>
Date:	Thu, 30 Apr 2009 14:59:43 +0100

Matthew Harrell wrote:
> Hi.  I just wanted to check back again and see how the tscard stuff you were
> working on was going
>
>   
Hi Matt,

  Yes, will reply in more detail off news group later on today.

  Basically, I've got a ts7400 booting 2.6.27.20 straight to ext2 rootfs 
using tssdboot - e.g. no nand flash (and all the crap associated with 
it).  The code should work on all TS boards with the 8 bit CPLD and rev 
0 sdcard interface.

    Cheers,

    -Brett

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [ts-7000] Re: Missing characters in Serial I/P, Breton M. Saunders <=

Next by Date:	[ts-7000] Re: ADC24 C source code?, bburtan
Next by Thread:	[ts-7000] Re: ADC24 C source code?, bburtan
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU