--- In "charliem_1216" <> wrote:
>
> --- In "j.chitte" <j.chitte@> wrote:
> >
> > --- In Matthieu Crapet <mcrapet@> wrote:
> > >
> > > Hi,
> > >
> > > > Do you mean this one?
> > > > http://marc.info/?l=linux-arm-kernel&m=123600398003826&w=3
> > > <http://marc.info/?l=linux-arm-kernel&m=123600398003826&w=3>
> > >
> > > Yes, this one (without mmu.c). No that I have 32mo SDRAM (not 64).
> > >
> > > > ep93xx/include/mach/memory.h? Note that somewhere between 2.6.28 and
> > > 2.6.29-rc7, someone removed
> > > > the #ifdef check in arch/arm/include/asm/memory.h. I had to add it
> > > back,
> > > Regards,
> > > matthieu
> > >
> >
> > Hi,
> >
> > what's the current state of this . I have a 64M board I want to try recent
> > 2.6 kernel on since ep93xx support seems to be getting pretty good now. How
> > far have you got?
>
> Hi --
>
> I've just applied Mathieu's patchset for 2.6.29.1, and it works fine for me
> on a 64M TS-7250. Mathieu reported that he could still generate an oops via
> 'cat /proc/pagetypeinfo' on his 32M board (I can't reproduce this, but I
> don't have a 32M board to test).
>
> Hartley Sweeten and Mel Gorman worked out an intermediate patch here:
> http://marc.info/?l=linux-arm-kernel&m=123791216416488&w=3
> that may be a better solution to 'cat /proc/pagetypeinfo', but there's been
> no further discussion. I haven't tried this.
>
> If you try Mathieu's latest, please report your results wrt above.
>
> Also, HRT for ep93xx seems to have disappeared from the realtime patch, I
> think by accident rather than design.
>
> >
> > thx.
> >
>
Hi Charlie,
is that a gnueabi build?
64M 7250 is my current target system as well could you post toolchain spec and
preferably a link to your .config ? That could save me some considerable time
experimenting to get to the same working kernel.
TIA.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|