[ts-7000] RTC battery status

To:
Subject:	[ts-7000] RTC battery status
From:	chris duran <>
Date:	Mon, 13 Apr 2009 10:45:06 -0700 (PDT)

Hi Guys
I have a ts-7250 with RTC (M48T86) working ok, but I need to write an aplication that considers the RTC's battery-status. Are there any way to get that information directly from the driver?
Now I read the status with open("/proc/driver/rtc", "r"), and parse the result, but I supose that there is another way to do that.

Thanks in advance.

--
Best regards,
Chris

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] RTC battery status, chris duran <= [ts-7000] Re: RTC battery status, charliem_1216

Previous by Date:	[ts-7000] Re: EmbeddedARM support??, palmeirapfmp
Next by Date:	[ts-7000] Can TS-7300 support a SDcard of size 4GB, naresh_raga
Previous by Thread:	[ts-7000] ts7200 uart dma, chaisc97
Next by Thread:	[ts-7000] Re: RTC battery status, charliem_1216
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU