[ts-7000] I2C support for ts-7350

["cafrunes" <>]

Hello,

I'm trying to control a very simple I2C device using a ts-7350 with a 2.6.21 
linux kernel (as supplied by Technologic Systems). The device is a motor 
controller (Devantech's MD03) with only 8 registers, which can be controlled 
easily using an USB-I2C adapter.

I've been reading the posts to this mailing list but I haven't been able to 
find clear hints for solving this issue. On the contrary, I've got the 
impression that I2C support is still "on development", but I'm not sure. 

I've read about "bit banged" I2C solutions, but I was wondering if the I2C 
Linux system is supported for this SBC (ts-7350). 

More clearly:

Is it possible to use the I2C with this board? How?
If possible, could someone provide a C example?

Thanks in advance,

Jorge





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/