[ts-7000] Enabling a login on the TS-GSM1 board

To:
Subject:	[ts-7000] Enabling a login on the TS-GSM1 board
From:	"timjones789" <>
Date:	Thu, 26 Mar 2009 16:05:48 -0000

Hi,

Is anyone else out there using the TS-GSM1 board, configured to give a login 
prompt when someone dials into it?.

I'm using the GSM1 board with the 7350 and have installed mgetty for this, but 
when I use the command:
T3:23:respawn:/sbin/mgetty -x0 -s9600 ttys0
in /etc/inittab and reboot, I get the error message:

INIT:T3 respawning too fast - disabled for 5 minutes.

Any clues?

Cheers



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Enabling a login on the TS-GSM1 board, timjones789 <=

Previous by Date:	[ts-7000] DIO2 port configuration, lazo93600
Next by Date:	Re: [ts-7000] buildroot 2.6 kernel for TS-7400, Tobias McNulty
Previous by Thread:	[ts-7000] DIO2 port configuration, lazo93600
Next by Thread:	[ts-7000] DMA for ISA Device - TS7800, lnicandi
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU