hgcaspeta <> [2009-02-27 18:49:20]:
> Hello
Hi,
> I am using a TS-7400 board. I can surf the internet with the IOGEAR
> usb wireless device, but when I try to use my GRPS modem the board
> crashes if I enable "defaultroute" in my configuration file. If I do
> not enable "defaultroute" my modem connects to the internet by I can't
> navegate because I don't have a default route. If I set defaultroute
> with "route add defaultroute ppp0" the system crashes.
And if it wouldn't crash with route it would crash in different part. You're
using acm module so I bet, that you're using TS kernel. If I were you, I
would try some latest 2.6 kernel, althought it isn't bug free either[1].
> I have an externat usbhub with external power, so the modem is not
> getting energy from the TS7400.
It's kernel, mainly tty/usb/serial problems. Nothing to do with USB power.
> I can connect to the internet in my lap using the same configuration
Do you use same kernel as on ts-7400 on your laptop? :)
1. http://www.kerneloops.org/search.php?search=serial_write
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|