[ts-7000] Making an image of the NAND to a SD card

["Daniel" <>]

For various reasons, when I started working on my project I chose to
use the on-board NAND as my development environment. However, I am not
getting close to the storage limit on the NAND and I would like to
switch over to a SD card. Is there a relatively simple method by which
I could create an image of the NAND and copy that image to the third
partition of a SD card already setup with the 3 partitions from the image.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/