--- In Christian Gagneraud <>
wrote:
>
> michael.ferrato wrote:
> > Hello,
> >
> > Have you succed in using tsbat3 and ts7800???
> >
> > With my ts7250, th device open is /dev/ttyTS1 when I insert
> > tsuart-bat.o and not /dev/ttyT3S.
>
> Hi,
>
> With ts7800 kernel module the device node has a different name, so you
> have two choices:
> - rebuild the bat3 program with a different device node name
> - make a symlink from the real TS-BAT3 device node to the one expected
> by the bat3 program
>
> But take care, i was told recently by TS that the TS-BAT3 and the
> TS7800 are not compatible, you need to cut the 5V feed from the
> TS-BAT3 board to the PC104 bus... You should better ask TS about what
> needs to be done exactly. (and report it to this list! ;))
>
> Cheers,
> Chris
> >
If someone from Technologic reads this it would be great to get some
confirmation or some official word on how these two boards should be
configured to work correctly.
We've been using the BAT3 with 7800s since the 7800s were first
released. There were initially some bugs in the 7800 drivers that had
to be fixed, and we did have a batch of BAT3s where we had to make a
cut because the batteries weren't charged enough to provide initial
power to the 7XXX (must be the cut you describe), but newer boards
seem to work out of the box.
The only problem I continue to have is that the bat3 charging daemon
will shutdown unexpectedly sometimes, and whether due to this or not I
don't know, but the bat3 does not always automatically power down
correctly. We've had to incorporate a reset switch connected to J3
because of this.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|