Can someone enlighten me as to the difference between the memory base
address and the i/o base address on the ts7800?
-- http://www.embeddedarm.com/about/resource.php?item=303#lcd --
Bus Addresses
To access peripherals on the PC104 bus it is necessary to add the base
address from the table below to the offset of the peripheral to get a
memory address for accessing the peripheral. For example, for ISA
8-bit I/O address 0x100, add 0xEE000000 to 0x100 to get 0xEE000100.
memory I/O
8-bit 0xEC000000 0xEE000000
16-bit 0xED000000 0xEF000000
-------------------------------------------
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|