ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ts-7000] DIO Subroutine for TS-7200

from [bonjelo2000] [Permanent Link][Original]
To:
Subject: [ts-7000] DIO Subroutine for TS-7200
From: "bonjelo2000" <>
Date: Sat, 31 Jan 2009 13:59:44 -0000 
Hi,

Is anyone aware of a C language subroutine for the DIO ports on the TS-
7200.  I would like to set direction and receive/set HI/LOW status on 
each of the 9 DIO1 header pins with a simple call in C"

Thanks


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Next by Date:  [ts-7000] SPI on standard TS7800/kernel 2.6.21-ts, wildpossumboy
Next by Thread:  Re: [ts-7000] DIO Subroutine for TS-7200, Matthieu Crapet
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU