[ts-7000] TS7300 FPGA IRQ

To:
Subject:	[ts-7000] TS7300 FPGA IRQ
From:	"mmcdonal2001" <>
Date:	Sat, 31 Jan 2009 04:38:39 -0000

Hello,
I am writing a driver to service the interrupt from the FPGA on the
TS7300. However request_irq() for irq 40 fails. I am using the
SA_SHIRQ flag. There are no other drivers using this resource.  Anyone
have any hints?

Thanks


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7300 FPGA IRQ, mmcdonal2001 <=

Previous by Date:	[ts-7000] Re: Segmentation Error with G++ but not with GCC, wap_surfer
Next by Date:	[ts-7000] Re: ts-can1 location in physical memory, greywolf9923
Previous by Thread:	[ts-7000] Segmentation Error with G++ but not with GCC, Donal
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU