ah... good call. fixed.
thanks :)
dan
--- In Christian Gagneraud <>
wrote:
>
> Dan wrote:
> > I'm trying to configure my board to boot via nfs. I have unpacked the
> > debian distribution from the ts website onto my host computer and
> > exported it via nfs. I removed the "fastboot" file from the exported
> > directory. I have edited and saved the linuxrc-nfsboot script with
> > the proper ip addresses and and nfs share (I think... the mount line
> > in the linuxrc-nfsboot script has the mount point as /mnt/root, not
> > just / which I don't quite understand). When I boot I get the
> > following and then it hangs.
>
> Hi Dan,
>
> You could check that the init scripts don't try to reconfigure the
> network interface. See /etc/network/interfaces in your nfs rootfs,
> typically you have to comment the line "auto eth0".
>
> Chris
>
> >
> >>> TS-BOOTROM - built Jul 15 2008
> >>> Copyright (c) 2008, Technologic Systems
> >>> Booting from onboard NAND flash...
> > .
> > .
> > .
> > .
> >>> Booting to NFS...
> > INIT: version 2.86 booting
> > Starting the hotplug events dispatcher: udevd.
> > Synthesizing the initial hotplug events...done.
> > Waiting for /dev to be fully populated...done.
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|