Re: [ts-7000] Including xuart7350.ko module on TS-7350 at startup

[sean machin <>]

Thanks,

I thought the preferred method was to add the module to /etc/modules,
but I couldn't work out where to put the driver so it was loaded 
successfully.

> add your modload to the file /etc/rc.d/rcS.sysinit
>
> be careful and ensure that you have an alternate method to boot your board
> if you need to recover.
>
> NFS boot is a good backup method.
>
> sean machin wrote:
>
>> Fellow listers,
>>
>> Simple question, how do I configure my TS-7350 so that the RS-485 driver
>> xuart7350.ko is loaded automatically on bootup?
>>
>> Thanks all,
>> Sean
>>
>  


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/