Re: [ts-7000] problem in building ts-7250 kernel on linux host

[Abid Rashid <>]

 Chris & Rich,
I think I was not using right HOSTCC. I use gcc-2.95 compiler on my machine.
I set HOSTCC as gcc-2.95 and it looked like 'make' working. If faced problems in building I have to return.
Thanks.
Best Regards
Abid

--- On Mon, 1/12/09, Christian Gagneraud <> wrote:

From: Christian Gagneraud <>
Subject: Re: [ts-7000] problem in building ts-7250 kernel on linux host
To:
Date: Monday, January 12, 2009, 2:40 PM

Abid Rashid wrote:
>
> Thanks for your attention.
> Yes, I edited Makefile and changed 'CROSS_COMPILE' path to where arm
> binaries are placed.
> 'CROSS_COMPILE =
> /usr/src/crosstool/ gcc-3.3-glibc- 2.2.5/arm- 9tdmi-linux- gnu/bin/arm- 9tdmi-linux- gnu-'.
> Nothing else I changed in the make file.
> I wonder do I need to install all the crosss tools from the scratch or
> do I only need to copy cross compiled binaries to a path(thats what I
> did). Any other suggestions?

You need a native compiler as well, dou you have it?
what gives the command "gcc --version"?

If you don't have it, try to go though your packet manager and install
the basic development tools.

Which distro are u using?

Chris

> Best Regards
> Abid
>
> --- On *Mon, 1/12/09, Rich Wilson /< com>/* wrote:
>
> From: Rich Wilson < com>
> Subject: Re: [ts-7000] problem in building ts-7250 kernel on linux host
> To: .com
> Date: Monday, January 12, 2009, 12:13 PM
>
> Did you set CROSS_COMPILE in the Makefile?
>
> On Mon, Jan 12, 2009 at 6:07 AM, Abid Rashid <abidrashid24@
> yahoo.com <mailto:abidrashid24@ yahoo.com>> wrote:
>
> Guys,
> I am trying to build the ts-7250 kernel.
> I have got cross compiler containing binaries from the ts website.
> When I run the make file, it give an error that
>
> 'gcc: command not found'
>
> It looked like that I have problem in setting up gcc compiler path.
> I tried setting up the path changing the default path to a path
> where
> my cross tool binaries are copied. But I keep getting the same
> error
> again and again.
> Is there any one to comment on this.
> Best Regards
> Abid
>
>
>
>
> --
> Rich Wilson
> com <mailto: com>
> 425-374-4760
> 425-337-7129
>
>
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___