Ok, so I am really confused. I believe I am not understanding the
hardware manuals correctly. Any help would be much appreciated I
can't seem to get my head around it. I have a 7260, and a 7200. Am I
understanding the following right?
On the 7200 the 40 pin DIO2 header (FPGA DIO) is being used by the PC-104.
What about on the 7260? Does the 40 pin DIO2 header (FPGA DIO) exist,
where is it? Can I use it? I gather this is not the same as the DIO2
which is on the 7260, but not on the 7200?
I'd rather use the FPGA DIO, turn off the FPGA use it as DIO with 5v,
then the DIO2 pins if they are not the same thing.
Am I free to use the DIO2 pins on the 7260 or is there conflict
because I use the SD ability?
What I really need are 2 pins that can do output preferably 5v. I am
already using the DIO1 pins for the keypad, and the LCD pins for an
LCD. Is there any way to do that without adding a peripheral?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|