[ts-7000] Weigand output on dio2, TS7200

ts-7000

[ts-7000] Weigand output on dio2, TS7200

To:
Subject:	[ts-7000] Weigand output on dio2, TS7200
From:	"ticrus00" <>
Date:	Mon, 05 Jan 2009 17:11:02 -0000

Can anyone point me in the right direction?  I need 2 weigand out pins.  Can 
this be 
done on the dio2 pins of the ts 7200? Any ideas on how to impliment this?  Has 
it been 
done before?  Thanks


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Weigand output on dio2, TS7200, ticrus00 <= [ts-7000] Re: Wiegand output on dio2, TS7200, ticrus00

Previous by Date:	Re: [ts-7000] Kernel replacement, Michael Schmidt
Next by Date:	Re: [ts-7000] Changing root password on TS-7800 "fastboot" environment, Theodore A. Roth
Previous by Thread:	[ts-7000] Re: Reading the DIO ports on TS-7800, Dan
Next by Thread:	[ts-7000] Re: Wiegand output on dio2, TS7200, ticrus00
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU