[ts-7000] Kernel replacement

To:
Subject:	[ts-7000] Kernel replacement
From:	"pointdexter67" <>
Date:	Sat, 03 Jan 2009 14:41:48 -0000

Hello all ,


My intention is to recompile the kernel for a TS 7300 system but I 
cannot find it as usually in /boot directory. Probably it is 
somewhere in partition 1 or 2 that I cannot access. How can I map 
these partitions so I can put there my own kernel.

Thank you.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Kernel replacement, pointdexter67 <= Re: [ts-7000] Kernel replacement, Michael Schmidt

Previous by Date:	[ts-7000] TS-7800 and ADC on the PC104 board how to, trucmuch_59
Next by Date:	[ts-7000] TS-7800 Sata boot ?, trucmuch_59
Previous by Thread:	[ts-7000] TS-7800 and ADC on the PC104 board how to, trucmuch_59
Next by Thread:	Re: [ts-7000] Kernel replacement, Michael Schmidt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU