ts-7000
[Top] [All Lists]

Re: [ts-7000] All LEDs(GREEN,RED,..) flashing after booting ????????????

To:
Subject: Re: [ts-7000] All LEDs(GREEN,RED,..) flashing after booting ???????????????
From: Craig Gates <>
Date: Wed, 03 Dec 2008 12:11:15 -0800
Check the the voltage/amps of your DC battery, it might not
have enough to power the board.

Craig

yanniepa wrote:
> 
> 
> Hello,
> 
> I was wondering if someone knows what it means when all LEDs flash at
> boot time if I am using DC battery to power up a TS7350 board?
> PS> If I use DC power supply they don't flash the board boots with no
> problem.
> 
> Hope someone helps me !
> Thanks
> 
> Yan~
> 
> 

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU