[ts-7000] getting segmentation fault & ssh won't work

To:
Subject:	[ts-7000] getting segmentation fault & ssh won't work
From:	"yanniepa" <>
Date:	Fri, 28 Nov 2008 19:33:55 -0000

I have something very unusual happening to my board(TS7350). I have
been developing some software to control a motor. For io testing
purposes I have tried to write logic 1 and 0 to DIO ang GPIOS.
Everything has been happening well until this morning. My program is
returning segmentation fault. The same program was working without any
modifications, nothing has changed. Also the ssh service went down and
I can only connect now through telnet. When I try to run the
/etc/init.d/ssh start I have this message "sshdPRNG is not seeded".

Is anybody has an idea of what could be my problem ?
Thanks!



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] getting segmentation fault & ssh won't work, yanniepa <=

Previous by Date:	[ts-7000] TS-7800 reboot fail, Pasqual Nebot
Next by Date:	[ts-7000] peek16 0x80840014 return segmentation fault, yanniepa
Previous by Thread:	[ts-7000] TS-7800 reboot fail, Pasqual Nebot
Next by Thread:	[ts-7000] peek16 0x80840014 return segmentation fault, yanniepa
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU