--- In "Mike Charnoky" <> wrote:
>
> Aha, I've got a solution. Technologic tech support informed me that
> the libraries shipped with the board are from Debian Sarge. I thought
> this was odd, since they don't seem to match the libraries on the
> sarge distro found on the USB key that comes with the dev kit. So, I
> poked around on the technologic ftp site and found *two* Sarge binary
> bundles.
>
> First, there is the sarge distro from the USB key:
>
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/distributions/debian-sarge-udev-11-15-2007.tar.gz
>
> There is also this sarge distro, and libraries match exactly the ones
> shipped with the TS-7250/60:
>
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/distributions/debian-sarge-256MB-05-01-2006.tar.bz2
>
> Use libpthread-0.10.so found in the latter distro and everything
> should be fine. I tried it and my application works fine now.
>
>
> Mike
>
> --- In "Mike Charnoky" <mcharnoky@> wrote:
> >
> > --- In "Anouk Ahamitet" <snowcone27@> wrote:
> >
> > > Our application works perfectly (well, almost, but that's a
different
> > > (hardware) issue) on the old board. But, when run on the new board,
> > > the exact same app gets this error:
> > >
> > > relocation error: /lib/libpthread.so.0: symbol __libc_fork,
> > > version GLIBC_PRIVATE not defined in file libc.so.6 with
> > > link time reference
>
Can somebody help me get this straight:
I used: ln -fs /lib/libpthread-0.10.so /lib/libpthread.so.0
and I get this at run time:
./thread_b: relocation error: /lib/libpthread.so.0: symbol
__libc_stack_end, version GLIBC_2.1 not defined in file ld-linux.so.2
with link time reference
Sorry to bring out a beat horse again, but I need this for a project.
Thank you,
Jimmy
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|