I too don't think it is a power issue. It worked with 2.4 and my
boards are all powered by AC adapters.
And FYI .. I tried G-202 from ZyXEL (which has a Zydas1211 chipset
same as GWU523) it worked perfectly.
Gajan
> I don't think that's a power suply problem. If I boot from 2.4 it
works. If
> I boot from 2.6 without having loaded the scsi and usb modules on
the 2.4
> works too
> > How much current does this thing draw?
> > I had a similar problem with a PCMCIA wireless device on the
TS5500 card.
> > It turned out that there was a power glitch when the PCMCIA device was
> > powered up.
> >
> >
> > jordixou wrote:
> >
> > I have the same problem when I try to bootload a kernel 2.6 and I
have
> > the usb modules loaded in the default kernel in a ts7400 board.
> > Have you solved it?
> >
> > --- In <ts-7000%40yahoogroups.com>,
> > "gajans.garage" <gajans.garage@> wrote:
> > >
> > > Hi,
> > >
> > > I'm running my TS7260 with the 2.6.21-ts. Everything works fine
until
> > > I insert my usb wireless adapter and reboot. The system freezes
during
> > > reboot.
> > >
> > > -ep93xx-ohci ep93xx-ohci: Unlink after no-IRQ? Controller is
probably
> > > using the wrong IRQ.
> > >
> > > Is the last message it gives.
> > >
> > >
> > > I have tried:
> > > 1. irqpoll in the boot options
> > > 2. Have tried booting using the tftp instead of bootload which I
> > > normally use
> > >
> > > I would appliciate on any help
> > >
> > > Thank you
> > > Gajan
> > >
> >
> > ------------------------------
> >
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 7.5.549 / Virus Database: 270.8.5/1755 - Release Date:
10/29/2008 5:27 PM
> >
> >
> >
> >
>
>
>
> --
> Jordi Soucheiron
> Software Engineer
>
> DEXMA
> Riu de l'Or 35, ES-08034, Barcelona
> t:/f: +34 93 280 19 18
> www.dexmatech.com
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|