Hi,
My board is an arm 7260 with a 2.6.21-ts and a Debian file system on
USB. When I make the root fs read only. ifup does not seem to work.
Can someone tell me the files that are being modified when ifup runs ?
# ifup -v eth0
Configuring interface eth0=eth0 (inet)
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/bridge
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
pump -i eth0
Failed to bring up eth0.
# mount -n -o remount,rw /
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
# ifup -v eth0
Configuring interface eth0=eth0 (inet)
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/bridge
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
pump -i eth0
run-parts --verbose /etc/network/if-up.d
# ls -al /etc/network/
total 40
drwxr-xr-x 8 root root 4096 Dec 31 21:25 ./
drwxr-xr-x 67 root root 4096 Dec 31 21:04 ../
drwxr-xr-x 21 root root 4096 Dec 31 21:25 config/
drwxr-xr-x 2 root root 4096 Oct 20 2008 if-down.d/
drwxr-xr-x 2 root root 4096 Oct 20 2008 if-post-down.d/
drwxr-xr-x 2 root root 4096 Oct 20 2008 if-pre-up.d/
drwxr-xr-x 2 root root 4096 Dec 31 1969 if-up.d/
lrwxrwxrwx 1 root root 16 Dec 31 21:11 ifstate -> /dev/shm/ifstate
-rw-r--r-- 1 root root 213 Dec 31 21:06 interfaces
-rw-r--r-- 1 root root 46 Dec 31 21:17 options
lrwxrwxrwx 1 root root 12 Dec 31 1969 run -> /dev/shm/run/
drwxr-xr-x 2 root root 4096 Dec 31 21:25 scripts/
Regards
Gajan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|