Hi Sean --
--- In sean machin <> wrote:
>
> Hi All,
>
> Has anyone successfully recompiled the 2.4.26-ts11 kernel for the
> TS-7260? The kernels I compile crash out when booted.
What is crash out? Better description may get better suggestions.
> Following section 6.1 in Technologic's Linux for ARM user's guide,
these
> are the steps I used:
>
> #using the unzipped kernel from
>
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/tskernel-2.4.26-ts11-src.tar.gz
> make ts7260_config
> make oldconfig
> make dep
> make bzImage # can't make vmlinux target as it ends up too big
for
Try just 'make zImage' here. Then the boot image is in
arch/arm/boot/zImage.
Regards, .... Charlie
> partition 1
> make modules_install INSTALL_MOD_PATH=/home/sean/modules/
> make modules INSTALL_MOD_PATH=/home/sean/modules/
> cd /media/disk-1/lib/modules/
> sudo cp -a /home/sean/modules/lib/modules/2.4.26-ts11/ .
> sudo dd if=linux24/arch/arm/boot/zImage of=/dev/sdc1 # the SD
card
> is /dev/sdc on my host machine
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|