leaton wrote:
> Hi All
> I just got a TS7390 with the touchscreen. I'm starting to get
> familiar with it. I've done extensive work with the 7200, 7250, and
> 5500 boards, but this one is new to me.
> Anyway, I've got a couple questions.
>
> 1. What little documentation that exists so far mentions using JP1 to
> switch the boot method. However, I cannot find JP1 on the board. The
> board I have has the optional real time clock. I think maybe the clock
> chip is covering the silkscreen for the JP. Can someone tell me which
> is what?
JP1 is near the corner of the board next to the speaker.
> 2. I've gotten the Eclipse environment up and running on my WinTel PC.
> However, it would be more convenient to just do my development natively
> on the TS7390. I'm guessing the tools exist on the SD card some place,
> but I will have to hunt around for them. Can someone give me a clue
> where to look?
Eclipse is on the first partition, but my understanding is that it has
X86 binaries and intended for use on a PC, not directly on the board.
You can develop directly on the board using the gcc command tools however.
> Thanks
> Larry
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|