[ts-7000] Regarding Mulcom Interface for additional com ports through

To:
Subject:	[ts-7000] Regarding Mulcom Interface for additional com ports through PCI 104 bus...
From:	"manmohan_thakur119" <>
Date:	Wed, 24 Sep 2008 09:16:30 -0000

hello all,

Need some information Regarding Mulcom Interface for additional com 
ports. If any body has done work with PCI 104 interface for standard 
mulcom board please let me know how to initialize com3 port (Like - 
ttyAMs  dev file is needed ).How to create it please give me some info 
about it.

i want to use this port for communication purpose using signal handler 
facility where i need to open ttyAM dev file for this port. then 
attach handler to it.

Eagrly waiting for kind reply...

Regards
Manmohan 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Regarding Mulcom Interface for additional com ports through PCI 104 bus..., manmohan_thakur119 <=

Previous by Date:	[ts-7000] slip configuring problem on ts7800 (perhaps a module problem?), nibapa
Next by Date:	[ts-7000] TS 7390 Jumper positions, leaton
Previous by Thread:	[ts-7000] TS-7260, Charles Doty
Next by Thread:	[ts-7000] TS 7390 Jumper positions, leaton
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU