ts-7000
[Top] [All Lists]

Re: [ts-7000] PPP inetrface is not showing in Ifconfig

To:
Subject: Re: [ts-7000] PPP inetrface is not showing in Ifconfig
From: "Eric Robishaw" <>
Date: Tue, 9 Sep 2008 07:38:00 -0500
1) ppp only shows up when ppp is up
2) to get ppp up, if the 7300 is setup similar to the 7800, ppp is not fully configured.

You can find a full description of setting up PPP on this post:

http://tech.groups.yahoo.com/group/ts-7000/message/12190

Some of the following you may not have to do, depending on your ppp device.

Eric



On Tue, Sep 9, 2008 at 4:28 AM, ts7300 <> wrote:

Hi,
When we using the Ifconfig to see Network Interface its shows only
ETH,LOOP Back Interface.PPP inetrface is not showing.
Why PPP interface is not coming???

Thanx,


__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU