| To: | |
|---|---|
| Subject: | Re: [ts-7000] ts7800 + ts7kv IO-Addr? |
| From: | Michael Schmidt <> |
| Date: | Thu, 04 Sep 2008 09:09:05 -0700 |
sywatec wrote:
> Hello,
> does anyone know what's the right io addresses of pld,fpga,video io for
> the ts7kv used together with a ts7800?
> (it's not the 0x11e0000).
PLD 0xEE2000E0
FPGA 0xEF200000
VRAM 0xED000000
> thanks
> markus
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] ts7800 + ts7kv IO-Addr?, sywatec |
|---|---|
| Next by Date: | [ts-7000] Howto recompile or cross-compile debian-arm kernel on SD card for TS-7260?, ApOgEE |
| Previous by Thread: | [ts-7000] ts7800 + ts7kv IO-Addr?, sywatec |
| Next by Thread: | [ts-7000] Howto recompile or cross-compile debian-arm kernel on SD card for TS-7260?, ApOgEE |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU