[ts-7000] TS-7800 and TS-DIO24.

To:
Subject:	[ts-7000] TS-7800 and TS-DIO24.
From:	"hblue94" <>
Date:	Fri, 29 Aug 2008 21:46:48 -0000

I can not change the port pins on the TS-DIO24 board using
port_test2.c program running on a TS-7800 board. Does the program
port_test2.c need to be modified to work with the TS-7800 board?

I would appreciate any suggestions.

Howard.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7800 and TS-DIO24., hblue94 <=

Previous by Date:	[ts-7000] Backup flash to SD?, Anouk Ahamitet
Next by Date:	[ts-7000] open("/dev/mem", O_RDWR) returns -1, sccjazz1
Previous by Thread:	[ts-7000] Backup flash to SD?, Anouk Ahamitet
Next by Thread:	[ts-7000] open("/dev/mem", O_RDWR) returns -1, sccjazz1
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU