[ts-7000] Kill PID 7800

To:
Subject:	[ts-7000] Kill PID 7800
From:	vigu <>
Date:	Mon, 25 Aug 2008 15:25:29 -0300

Hi all how do I kill pid while a process is being run on on board
flash boot. I killing the process but it doesnt accept any command and
it doesnt shuts if I use ctrl + c..... what should be done to kill the
process??? Please help me out and thanks in advance

-- 
With regards,
Vignesh Badrinarayanan

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Kill PID 7800, vigu <= Re: [ts-7000] Kill PID 7800, Ömürhan Akdemir Re: [ts-7000] Kill PID 7800, Jim Jackson

Previous by Date:	[ts-7000] Ethernet not working 7260, Fabio Vaz
Next by Date:	[ts-7000] Re: Ethernet not working 7260, janne.kario
Previous by Thread:	[ts-7000] Ethernet not working 7260, Fabio Vaz
Next by Thread:	Re: [ts-7000] Kill PID 7800, Ömürhan Akdemir
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU