--- In "janne.kario" <> wrote:
>
> --- In Matthieu Crapet <mcrapet@> wrote:
> >
> > It should boot now boot on TS-7250/60.
>
> I'm still having trouble booting the kernel with this latest patch.
> I've tried making a minimal kernel image and disabling all unnecessary
> stuff. One interesting thing to note is that my working 2.6.25 kernel
> does not seem to have the discontigmem patch applied and yet it's
> working perfecly (eg. kernel boots and cat /proc/meminfo reports 64Mb).
>
> j
>
I'm having the same issue you were having (just get "done, booting the
kernel", then nothing)
Have you found a solution yet? My system (TS-7260) only has 32 MB of
ram. I'm trying to boot with the local flash (/dev/mdtblock1) as the
root, with the same root filesystem as was originally installed. I
installed all the new modules into /lib/modules/2.6.24.4-matt. I
downloaded the kernel via tftp.
I noticed yaffs isn't in the kernel config, is that part of the
problem? I suppose I could set up an nfs root, but shouldn't I get
some output before it gets that far? Do I need an initrd (because
devfs isn't available)?
I'm a little new to this system, so if someone else has already solved
this problem somewhere else, I apologize for asking again.
I really want the SPI driver piece of the patch...
-Steve
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|