I'm using the 7400. For weeks I have been making copies of a master
flash card using dd and everything worked fine.
When I received a new batch of the same 1g SD card I've been using
and made a copy, it booted up and ran just fine, but during testing
I removed power from the 7400 and when it booted back up, it locked
up during fsck. It always locked up at 2.9%. I've left it running
for 8+ hours and it's just stuck at 2.9%.
I've since tried at least 6 more SD cards and they all do the exact
same thing. I also tried 4-5 cards from different manufacturers and
they all do the same thing, but at a different % in the fsck.
I tried making a new image of the master and still the same thing.
The master itself works fine even when power is removed. fsck fixes
a few minor problems and it boots up and runs.
Anyone have any ideas? I'm completely stumped after 3 days of trying
everything I can think of.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|