ts-7000
[Top] [All Lists]

Re: [ts-7000] Wifi Master mode

To:
Subject: Re: [ts-7000] Wifi Master mode
From: Christopher Friedt <>
Date: Mon, 14 Jul 2008 18:57:33 -0400
You should first verify whether or not the chipset even supports master 
mode - according to

http://wireless.kernel.org/en/users/Drivers/zd1211rw

"not yet"

Christopher

Fabio Vaz wrote:
> 
> 
> Hello,
> 
> I'm trying to put my USB Zydas wifi to work on master mode. I'm using
> TS 2.6.21 kernel on a TS-7200 board. When I connect the wifi adapter
> I get :
> zd1211rw 1-3:1.0: usb_probe_interface
> zd1211rw 1-3:1.0: usb_probe_interface - got id
> ep93xx-ohci ep93xx-ohci: GetStatus roothub.portstatus [2] =
> 0x00100103 PRSC PPS PES CCS
> usb 1-3: reset full speed USB device using ep93xx-ohci and address 8
> ep93xx-ohci ep93xx-ohci: GetStatus roothub.portstatus [2] =
> 0x00100103 PRSC PPS PES CCS
> usbdev1.8_ep01: ep_device_release called for usbdev1.8_ep01
> usbdev1.8_ep82: ep_device_release called for usbdev1.8_ep82
> usbdev1.8_ep83: ep_device_release called for usbdev1.8_ep83
> usbdev1.8_ep04: ep_device_release called for usbdev1.8_ep04
> zd1211rw 1-3:1.0: firmware version 4725
> zd1211rw 1-3:1.0: zd1211b chip 0ace:1215 v4810 full 00-02-72
> AL2230_RF pa0 g--NS
> zd1211rw 1-3:1.0: eth1
> drivers/usb/core/inode.c: creating file '008'
> hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0008
> 
> I execute a iwconfig it shows :
> :root# iwconfig
> lo no wireless extensions.
> 
> eth0 no wireless extensions.
> 
> eth1 IEEE 802.11b/g ESSID:off/any Nickname:"zd1211"
> Mode:Managed Access Point: Invalid
> Encryption key:off
> Link Quality:0/100 Signal level:-144 dBm Noise level:0 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> 
> If I call iwconfig eth1 mode master :
> :root# iwconfig eth1 mode master
> Error for wireless request "Set Mode" (8B06) :
> SET failed on device eth1 ; Invalid argument.
> 
> If I change the mode to ad-hoc or manger it works :
> :root# iwconfig eth1 mode ad-hoc
> :root# iwconfig
> lo no wireless extensions.
> 
> eth0 no wireless extensions.
> 
> eth1 IEEE 802.11b/g ESSID:off/any Nickname:"zd1211"
> Mode:Ad-Hoc Cell: Invalid
> Encryption key:off
> Link Quality:0/100 Signal level:-144 dBm Noise level:0 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> 
> :root# iwconfig eth1 mode managed
> :root# iwconfig
> lo no wireless extensions.
> 
> eth0 no wireless extensions.
> 
> eth1 IEEE 802.11b/g ESSID:off/any Nickname:"zd1211"
> Mode:Managed Access Point: Invalid
> Encryption key:off
> Link Quality:0/100 Signal level:-144 dBm Noise level:0 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> 
> Is it a problem of the TS zd1211 driver ? It used to work on TS 2.4
> kernel.
> 
> 

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU