On Wed, Jul 9, 2008 at 10:08 PM, salazarluquin_sf
<> wrote:
> Hi,
>
> I tried to install the RT73 driver (wireless usb). I followed the
> README file but when I put the command "make all" something comes
> wrong. I don´t have any idea. This is what appears:
>
> --- Ralink RT73 Station Configuration --------------------
>
> Linux kernel source directory [/usr/src/linux-2.4.26-ts11]: /linux24
>
> Linux kernel source directory : /linux24
>
> Module install directory : /lib/modules/2.4.26-
> ts11/kernel/drivers/net
>
> :Module# make all
> cc -D__KERNEL__ -I/usr/src/linux-2.4.22-1.2115.nptl/include -O2 -
> fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -
> mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -
> include /usr/src/linux-2.4.22-
> 1.2115.nptl/include/linux/modversions.h -DDBG -Wall -Wstrict-
> prototypes -Wno-trigraphs -DRALINK_WPA_SUPPLICANT_SUPPORT -
> DBLOCK_NET_IF -c -o rtmp_main.o rtmp_main.c
> cc1: error: invalid option `preferred-stack-boundary=2'
> cc1: error: bad value (i686) for -march= switch
> Assembler messages:
> Error: unknown architecture `i686'
>
> make: *** [rtmp_main.o] Error 1
Edit the Makefile and remove the "-march=i686" from the compiler
parameters (you are building for ARM). I think it will compile without
any -march parameter.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|