Brian,
It's a problem with wpa_suplicant, you need to configure it to match
your AP settings.
Try the TSWIFIBOX manual:
http://www.embeddedarm.com/documentation/ts-wifibox-manual.pdf
I gave up because in my case i'll use in master mode and it already
worked.
regards
Adriano
--- In "Adriano Naspolini" <>
wrote:
>
> Yes Brian, i think i have the same problem with zd_b.o and stick
> bought last month. In my case the proessor freezes and i need to turn
> it off.
> I sent an email to ts support and they answered:
>
> > Adriano,
> > I am copying this to Eddie, he can try to diagnose your problem.
> >
> > Sincerely,
> > Grant
>
> So I'm waiting...
>
> Regards
>
> Adriano
> --- In "vandergaastbrian"
> <vandergaastbrian@> wrote:
> >
> > Has anyone had problems with the zd_b.o driver for the new iogear
wifi
> > sticks? this is my procedure for bootup but the stick seems to freeze
> > after a certain amount of data transfer. Any help would be much
> > apreciated.
> >
> > /usr/bin/loadUSBModules.sh
> > insmod zd_b.o
> > ifconfig wlan0 up
> > ifconfig wlan0 'My IP'
> > iwconfig mode ad-hoc essid 'My ID'
> >
> > Thanks, Brian
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|